Single

 Piece Price

Price per  Case

-

-

-

LOCTITE THREADLOCKER APPLICATOR 250 ML & 50 ml  Applicator dispenses metered drops of liquid anaerobic products Adjustable for controlled dispensing of shots from 0.01 to 0.40 ml for viscosities up to 30,000 cP.  Does not leak regardless of bottle orientation.  Replacement nozzle & tubing available. 250 ML SIZE ON SALE!

250 ml Hand Pump Dispenser  Reg 100.97 ea. On sale (while supplies lasts. only 1 pcs left!)

Loctite® Threadlockers

Locks and seals while preventing parts from loosening due to vibration.  Eliminates need for stocking expensive lock nuts and lock washers.

220 Threadlocker - Blue
Wicking grade, low Strength for small pre-assembled fasteners under 1/4" (6 mm). Parts can be separated using hand tools.  Breakaway torque: 85/170 in lbs

222MS Threadlocker - Purple
Low Strength/Small Screw Ideal for fastener diameters of 1⁄4" (6 mm) and smaller. Controlled lubricity for accurate clamp loads. Parts can be separated using hand tools. Breakaway torque: 85/170 in lbs

242 Threadlocker - Blue
Medium Strength A general purpose, removable threadlocker for fasteners between 1⁄4" and 3⁄4" (6 to 20 mm) diameters. Controlled lubricity for accurate clamp loads. Parts can be separated using hand tools.

 243 Threadlocker - Blue
Medium Strength/Oil Resistant  A general purpose, medium  strength threadlocker with improved oil tolerance. For fasteners between 1⁄4" and 3⁄4" (6 to 20 mm) diameters  Parts can be separated using hand tools.

246™ Threadlocker - Blue
Medium Strength/High Temperature  This threadlocker resists oil and
mild surface contamination at continuous temperatures to 450°F.
Suitable for fasteners between 1⁄4" and 3⁄4" (6 to 20 mm) diameters.

QuickStix™ 248™ Threadlocker Stick  Medium Strength/Removable/Blue
New, patented semi-solid stick formula offers added convenience and
portability. Like Loctite® 242®, this threadlocker stick is well suited for 1⁄4" to 3⁄4" (6 to 20 mm) fasteners and is removable with hand tools. The semisolid formula also means it won’t spill or leak.

262™ Threadlocker - Red
Medium to High Strength A permanent threadlocker for fasteners up to 3⁄4" (20 mm) diameter. High lubrication for easy assembly. Excellent for preventing rust and corrosion in extreme chemical/environmental conditions.  Requires heat or special tools for removal.

266™ Threadlocker - Red/Orange
High Strength/High Temperature Fast fixturing threadlocker resists oil and mild surface contamination at temperatures to 450°F. Locks fasteners up to 3⁄4" (20 mm) in diameter.

QuickStix™ 268™ Threadlocker Stick
High Strength/Red Revolutionary semi-solid stick formula is high strength and best suited for fasteners up to 3⁄4" (20 mm). Semi-solid formula offers added convenience and portability. Localized heat and hand tools are required to separate parts.

271™ 271™ Threadlocker - Red
Permanent high strength, low viscosity threadlocker for heavy duty applications. Use with fasteners 3/8" to 1" (25 mm) in diameter.

272™ Threadlocker - Red  Permanent, High Strength/High Temperature
Withstands temperatures to 450°F.  Provides a fast cure on most
surfaces, including “as received” fasteners. Recommended for bolts
up to 11⁄2" (36 mm) in diameter. Heat and hand tools are required
for disassembly.

277™ Threadlocker - Red   High Strength Locks fasteners up to 11⁄2" (36 mm). Protects threads from rust and corrosion.  Heat and hand tools are required for disassembly.

290™ Threadlocker - Green
Wicking Grade. A medium strength threadlocker for pre-assembled bolts up to 1⁄2" (12 mm). Penetrates threads by capillary action. Secures set
screws and other assemblies after settings are completed. Seals
welds and porous metal parts. Protects threads from rust and
corrosion. Localized heating and hand tools are needed for disassembly.

294 – High temperature/wicking grade threadlocker

425 Assure™ – Surface curing low-strength, fast-curing threadlocker for  plastic fasteners and small metal fasteners

2432 – Low halogen/low sulfur medium-strength threadlocker

Primerless Threadlockers

2440™ Primerless Threadlocker - Blue  Primerless/Medium Strength
threadlocker is particularly fast curing, thereby reducing or
eliminating the need for primers. Performs well on all substrates.
It develops useable strength (100 in.-lbs.) within one hour. Parts can
be separated using hand tools.  

2760™ Primerless Threadlocker  - Red  Primerless/High Strength This threadlocker is particularly fast curing, thereby reducing or eliminating the need for primers. Particularly suitable for heavy duty applications where resistance to heavy shock, vibration, and stress levels are required.

CHOOSING THE RIGHT LOCTITE® BRAND THREADLOCKER FOR THE APPLICATION
Choosing the right Loctite® brand threadlocker for the
application is simple. Just answer these questions.

1. Do you need a threadlocker that can be removed or
one that is permanent?  Loctite® brand threadlockers are
available in removable or permanent formulations.

2. What size thread are you locking?
Loctite® brand threadlockers are available in a variety of
strengths to lock any size fastener.

3. Is the application a blind hole or a thru-hole?
The application method for blind hole assemblies differs
from standard thru-hole assemblies.

4. Are there threadlockers for pre-assembled bolts?
Henkel offers Loctite® brand wicking grade threadlockers
that secure set screws and other assemblies after
settings are completed.

5. What kind of metal(s) will be used?
On two inactive metals such as stainless steel, zinc,
magnesium, black oxide, cadmium, anodized aluminum,
passivated, titanium, and others, a primer is needed to
cure Loctite® brand threadlockers. If only one inactive
metal, no primer is needed.

6. What other environmental conditions exist?
Loctite® brand threadlockers are formulated to meet any
application need – high temperature, severe vibration,
and chemical resistance.

7. Will your application have to meet any
agency approval?
The Loctite® brand offers the broadest line of products
approved by some of the most demanding regulatory
agencies – NSF*, UL*, Military.
 

ANSWERS TO THE MOST FREQUENTLY  ASKED QUESTIONS (FAQ) ABOUT USING LOCTITE® BRAND THREADLOCKERS

Q. How do I disassemble parts? What is the procedure?
A. Use standard hand tools for disassembly of low and
medium strength threadlockers. For high strength
threadlockers, apply localized heat to nut or stud for
5 minutes at 450°F. Disassemble while hot.

Q. When should I use a primer with threadlockers and
when is it not necessary?
A. Always use a primer when two inactive metals are
involved, or when you need to speed up the curing
process for faster return to service. See Surface
Preparation section for a list of active and
inactive surfaces.

Q. Can I use threadlockers on plastic threads?
A. This is not recommended as softening and/or stress
cracking can occur.

Q. I have excess squeeze-out of threadlocker product.
Why hasn’t it cured?
A. The anaerobic chemistry will cure only between metal
surfaces when deprived of air.

Q. I used a permanent threadlocker on a blind hole
application and the fastener still backed out with
vibration. Why?
A. The application method for blind hole assemblies
requires that product be applied to both parts. If product
is only applied to the fastener, air pressure will force the
liquid threadlocker to escape as you torque it down.
Lack of uniform coverage creates air pockets, causing
incomplete cures which result in failures.

 

All the Thrills... ...none of the spills   Loctite® QuickStix™ are the first solid form of anaerobic and anti-seize products to embody the same reliable performance you've come to expect from Henkel Corp. They're neat, clean, easy to carry, and easy to apply. Just remove the cap, wipe it on, replace the cap, and toss it in your pocket or toolbox. And, QuickStix™ products won't cure if you happen to lose the cap! Henkel Corp. invented and patented these new solid versions of their Loctite® formulas.  offer the same high-performance capabilities as their liquid counterparts. Yet they’re ideal for applications where liquids can’t be controlled – as in overhead assemblies that could drip or hard-to-reach jobs where dexterity is required.  Readers of Plant Engineering Magazine voted Loctite® QuickStix™ 248™ Blue Threadlocker the 2003 Grand Award Product of the Year!